Touch-up pens for powder coating: Professional surface repair

Scratches, chips, or assembly errors on a high-quality surface are annoying, but can be professionally repaired with the right tools. When repairing a powder coating , color matching is the biggest challenge. Conventional touch-up pens often deviate slightly from the original color.

Our solution: A simple touch-up pen for powder coatings that you mix directly with the original powder coating of your existing coating. This guarantees a 100% match in color, texture, and gloss level.

Repairing coatings with a touch-up pen: The challenge of color fidelity

A high-quality surface coating on aluminum or steel cannot simply be touched up with standard paints. Anyone wanting to repair a powder coating will usually find that color shades like "matte black" vary depending on the manufacturer.

Our touch-up pen for powder coating therefore uses a special solvent system . Instead of relying on predefined colors, the pen acts as an applicator for your own powder:

• Custom mix: Simply add 1–3 grams of thepowder coating used to the pen.
• Precision: The solvent binds the powder particles to form a liquid coating that exactly matches your component.
• Versatility: Ideal as a paint pen for steel components, rims or in industry.

Step-by-step: Repairing powder coating with a touch-up pen + powder

Using our paint pen is incredibly easy and delivers professional-level results:

1. Preparation: Clean and degrease the damaged area.
2. Filling: Open the empty pen and add approximately 1–3 grams of the Pour in original powder coating .
3. Activation: Vigorous shaking mixes the solvent with the powder to form a homogeneous varnish.
4. Application: Place the touch-up pen precisely on the scratch and spread the paint evenly.

Important factors: substrate and drying time

The drying time and the result depend significantly on the material and the environment:

• Drying phases: Dust-dry after approx. 10–15 min., touch-dry after 30–60 min. and fully cured after approx. 24 hours.
• Material influence: Metallic surfaces such as aluminum conduct heat well. Ensure the workpiece is ideally at room temperature (approx. 20°C) to guarantee optimal drying.
• Adhesion: For extremely smooth surfaces, it is recommended to lightly roughen the surface with fine abrasive fleece to improve mechanical anchoring.

Efficiency for professionals: Our touch-up pen bundles

For workshops and assembly teams, we also offer our pens in practical sets. The advantage here lies not only in the price, but also in process reliability.

• Set of 3 touch-up pens : Ideal for "premixing" the most common standard colors.
• 5-piece set of touch-up pens : Maximum flexibility for large projects or frequently changing color tones.
• Advantage: By premixing your most frequently used colors (e.g., a paint pen for powder coating in matte black ), you immediately have the color-accurate pen at hand during final inspection.

FAQ: Frequently asked questions about the touch-up pen for powder coatings

How much powder do I need for the touch-up pen?

We recommend 1 to 3 grams of powder coating . Start with a small amount and add more as needed to achieve the desired coverage.

How long does the touch-up pen last and does it dry out?

A pre-mixed pencil will keep for approximately 6 to 12 months . To prevent the pencil from drying out, the cap must audibly click into place after each use. Store the pencil in a cool, upright place with the tip pointing upwards.

Can I also use the pen for rims or cars?

Yes, the pen is universally applicable. It is ideal as a touch-up pen for rims or for repairing stone chips, provided you use the appropriate color powder.

Secure your professional surface repair solution now. Visit our shop at Visit www.pulverlackfachhandel.de and find the right touch-up pen for your project!